ITALIAN SLATE

Laying systems

For internal floors you can use chemical adhesives,  such as Kerelastik or Granirapid Mapei.

For external floor we recommend to put adhesive or mortar also on the back side of the tiles to avoid empty spaces, between tiles and laying surface, and frost cause    breakages.

For external cladding or plinthing we suggest to use besides the cementing mortar, also brass screws or individual anchors to put between the slab and the wall.

We recommend  to carefully  clear the surface of the tiles during  the laying, because dry residues of lime or cement are difficult to remove.

During the laying you can leave from 3 mm. to 8 mm. between the tiles or no space.

To seal you can use Keracol 4/15 Mapei and put it directly in the space between the tiles.